ANILINE BLUE Msds - LABORATORY CHEMICALS
NILE CHEMICALS
Aniline Blue
WS (C.I. 42780)
1. Product Identification
Synonyms: Aniline blue, C.I.
42780
CAS No.: 28631-66-5
2. Composition/Information on Ingredients
Ingredient
CAS No
Percent
Hazardous
---------------------------------------
------------ ------------
---------
Aniline Blue
28631-66-5
90 - 100%
No
3. Hazards Identification
Health Rating: 1 - Slight
Flammability Rating: 1 - Slight
Reactivity Rating: 1 - Slight
Contact Rating: 1 - Slight
Lab Protective Equip: GOGGLES; LAB COAT; VENT HOOD; PROPER GLOVES
Storage Color Code: Orange (General Storage)
-----------------------------------------------------------------------------------------------------------
Potential Health Effects
Inhalation: May cause irritation
to the respiratory tract. Symptoms may include coughing and shortness of
breath.
Ingestion: May cause irritation
to the gastrointestinal tract. Symptoms may include nausea, vomiting and
diarrhea.
Skin Contact: May cause
irritation with redness and pain.
Eye Contact: May cause
irritation, redness and pain. This product contains an anionic dye. Similar
dyes have not caused injury to the cornea or conjunctiva in documented
exposure cases with human or rabbit eyes.
Aggravation
of Pre-existing Conditions: No information found.
4. First Aid Measures
Inhalation: Remove to fresh air.
Get medical attention for any breathing difficulty.
Ingestion: If swallowed, give
several glasses of water to drink to dilute. If large amounts were swallowed
or symptoms occur, get medical advice. Never give anything by mouth to an
unconscious person.
Skin Contact: Immediately flush
skin with plenty of water for at least 15 minutes. Remove contaminated
clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes
before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush
eyes with plenty of water for at least 15 minutes, lifting upper and lower
eyelids occasionally. Get medical attention if irritation persists.
5. Fire Fighting Measures
Fire: Not expected to be a fire
hazard.
Explosion: No information found.
Fire Extinguishing Media: Dry
chemical, foam, water or carbon dioxide.
Special Information: In the event
of a fire, wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with full facepiece operated in the pressure demand or
other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective
equipment as specified in Section 8. Spills: Sweep up and containerize for
reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust
dispersal.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area.
Protect against physical damage. Isolate from incompatible substances.
Containers of this material may be hazardous when empty since they retain
product residues (dust, solids); observe all warnings and precautions listed
for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None
established.
Personal Respirators (NIOSH
Approved): For conditions of use where exposure to dust or mist is
apparent and engineering controls are not feasible, a particulate respirator
(NIOSH type N95 or better filters) may be worn. If oil particles (e.g.
lubricants, cutting fluids, glycerine, etc.) are present, use a NIOSH type R
or P filter. For emergencies or instances where the exposure levels are not
known, use a full-face positive-pressure, air-supplied respirator. WARNING:
Air-purifying respirators do not protect workers in oxygen-deficient
atmospheres.
Skin Protection: Wear protective
gloves and clean body-covering clothing.
Eye Protection: Use chemical
safety goggles. Maintain eye wash fountain and quick-drench facilities in
work area.
9. Physical and Chemical Properties
Appearance: Dark red to purple
solid.
Odor: Odorless.
Solubility: Soluble in water.
Specific Gravity: No information
found.
Boiling Point: No information
found.
Evaporation Rate (BuAc=1): Not
applicable.
10. Stability and Reactivity
Stability: Stable under ordinary
conditions of use and storage.
Hazardous Decomposition Products:
Burning may produce carbon monoxide, carbon dioxide, sulfur oxides, and
nitrogen oxides.
Hazardous Polymerization: Will
not occur.
Incompatibilities: Strong
oxidizers.
Conditions to Avoid:
Incompatibles.
11. Toxicological Information
No LD50/LC50 information found relating to normal routes of occupational
exposure. Investigated as a mutagen.
--------\Cancer
Lists\------------------------------------------------------
---NTP
Carcinogen---
Ingredient
Known Anticipated
IARC Category
------------------------------------
----- -----------
-------------
Aniline Blue (28631-66-5)
No
No
None
12. Ecological Information
Environmental Fate: No
information found.
Environmental Toxicity: No
information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an
appropriate and approved waste disposal facility. Processing, use or
contamination of this product may change the waste management options. State
and local disposal regulations may differ from federal disposal regulations.
Dispose of container and unused contents in accordance with federal, state
and local requirements.
14. Transport Information
Not regulated.
15. Regulatory Information
--------\Chemical Inventory
Status - Part 1\---------------------------------
Ingredient
TSCA EC
Japan
Australia
-----------------------------------------------
---- ---
----- ---------
Aniline Blue (28631-66-5)
Yes Yes
Yes Yes
--------\Chemical Inventory
Status - Part 2\---------------------------------
--
Canada--
Ingredient
Korea
DSL
NDSL Phil.
-----------------------------------------------
----- ---
---- -----
Aniline Blue (28631-66-5)
Yes Yes
No Yes
--------\Federal, State &
International Regulations - Part 1\----------------
-SARA 302- ------SARA
313------
Ingredient
RQ TPQ
List Chemical Catg.
-----------------------------------------
--- -----
---- --------------
Aniline Blue (28631-66-5)
No No
No
No
--------\Federal, State &
International Regulations - Part 2\----------------
-RCRA- -TSCA-
Ingredient
CERCLA 261.33
8(d)
-----------------------------------------
------ ------
------
Aniline Blue (28631-66-5)
No
No
No
16. Other Information
It must be recognised that the physical and chemical properties of any
product may not be fully understood and that new, possibly hazardous
products may arise from reactions between chemicals. The information given
in this data sheet is based on our present knowledge and shall not
constitute a guarantee for any specific product features and shall not
establish a legally valid contractual relationship.
www.nilechemicals.com
